Inequalities (Ungleichungen)
The tasks in this topic follow a fixed pattern. At the top there is an inequality, a chain of inequalities (Ungleichungskette) or a short word problem; five claims follow underneath, and the question asks which of them are true. The tick column is headed “Richtig”. Most claims take one of three forms: “The solution set (Lösungsmenge) is …”, “The number belongs to the solution set”, or a general rule for inequalities. Once you have found the solution set yourself, you decide the first two forms in seconds; for the third you need to know why a rule holds and where it stops holding.
The formula sheet (Formelsammlung) gives you two things for this topic. It lists the four interval notations , , and , and it contains the quadratic formula, which finds the zeros of a quadratic expression. So you do not need to memorise the brackets; what you need is to obtain the set that goes inside them. What the sheet does not contain: not a single rule for transforming inequalities, no notation for unbounded intervals such as , and no symbol for the union of two intervals. Yet these are exactly what most claims rest on, and this article builds them up. At its centre is one question that comes up at every step: what is the sign of the quantity you are multiplying or dividing by right now?
A solution set is a set of numbers, and its brackets settle the endpoints
The solution set of an inequality is the set of all real numbers that give a true statement when substituted. For an inequality this is almost never a single number but a whole stretch of the number line, or several such stretches.
An interval is the set of all real numbers between two bounds. A square bracket means the bound belongs to the set, a round one means it does not.
| Notation | means | Bounds |
|---|---|---|
| both excluded | ||
| both included | ||
| only included | ||
| only included | ||
| unbounded to the left | ||
| unbounded to the right |
The first four rows are on the formula sheet, the last two are not. The symbol is not a number; it only says that there is no bound in that direction, which is why it always stands next to a round bracket. An interval that is unbounded on one side only is also called a ray (Strahl). The whole number line is written , and the set with no element at all is called the empty set (leere Menge), written .
If a solution set consists of two separate pieces, they are joined with the symbol , the union (Vereinigung). A number belongs to if it belongs to or to . So contains every number below and every number from on; the gap in between, , does not belong to it.
An interval with two different bounds contains infinitely many real numbers. Besides its two bounds, contains for instance , and .
The symbols , , and are called inequality signs (Ungleichheitszeichen). An inequality with or is called strict (streng), one with or non-strict. The bounds of an interval are its endpoints (Randpunkte).
For claims of the form “The number belongs to the solution set” you do not even need the whole set. Substitute the number into the original inequality and check. This pays off most at the endpoints. If an endpoint arose because both sides become equal, the expression there equals the comparison value exactly, and whether it belongs to the set depends only on the sign: a strict inequality excludes it, a non-strict one includes it. Endpoints of other origin, such as the zero of a denominator or the edge of the domain of a root, follow rules of their own; the sections on fractions and roots deal with them.
Your turn1 of 12
Which of the numbers belongs to the set ?
A negative factor mirrors the number line
A step is called an equivalence transformation (Äquivalenzumformung) if it does not change the solution set. If you use only such steps, you may read the solution set off at the end without working backwards.
You can see which steps these are on the number line. An inequality says that the point lies to the left of the point . Every transformation moves both points, and the only question is whether the same one is still on the left afterwards.
- Shifting. Adding or subtracting the same number on both sides moves both points by the same distance. Adding turns into ; the order is the same.
- Stretching. A positive factor pulls the number line apart from zero or squeezes it together without swapping left and right. The factor turns into .
- Mirroring. A negative factor stretches and additionally mirrors at zero, and a mirror swaps left and right. With the factor , becomes the numbers and , and now is the larger one: . The inequality sign has to turn with it.
Dividing is multiplying by the reciprocal, and the reciprocal has the same sign as the number; so the same holds for division. Multiplying by zero is no transformation at all: every inequality would become or , and the information would be lost.
Inequalities can also be chained. From and you get the chain , and from it you read off : the middle link may drop out. This property is called transitivity (Transitivität). An example with all steps, where appears on both sides:
The first step subtracted and on both sides, the second divided by , and that turned into . The solution set is . Two checks confirm it: for you get , true; for the endpoint you get , false, so does not belong to the set. If you prefer to move to the right-hand side, you get , divide by the positive number and arrive at without any flipping: the same result by a route that avoids the mirror.
Fractions with numbers in the denominator are removed by multiplying by the common denominator. It is positive, so the sign stays:
The multiplication was by , applied to every term, including the that has no denominator. The solution set is ; at the left side is and the right side , and is true.
At the end of such a linear calculation, stands alone on one side, or has vanished altogether. In the first case the solution set is a ray. In the second a statement without remains: becomes , which is false, and the solution set is empty. Had it been , what remains is , true for every , and the solution set would be all of .
Your turn2 of 12
Which set is the solution set of ?
A chain of inequalities is transformed in all three places at once
A chain such as says two things at once: and . You can solve the two parts separately. It is faster to apply each step to all three parts until stands alone in the middle. If a negative number stands in front of , both signs flip when you divide, and afterwards the chain reads from right to left:
In order, this reads , that is . Each sign keeps its kind, a strict one stays strict and a non-strict one non-strict, but every bracket has to stay with its number: the belonged to the , and the has become the . If you only reorder the numbers and leave the brackets in place, you write , and the check with shows the mistake: the middle is , and is false.
Your turn3 of 12
Which set solves the chain ?
Applying a function to both sides keeps the order only where it is monotonic
So far both sides were combined with the same number. Squaring, taking roots and taking reciprocals are something else: they apply a function to each side. Whether the comparison survives, flips or becomes open is decided by the monotonicity (Monotonie) of that function.
A function is called strictly increasing on a region if there always implies , and strictly decreasing if it always implies .
If both sides lie in a region where increases, the sign stays; if both lie in a region where decreases, it reverses. If they lie on different sides of a point where changes direction, the outcome is open, and then a single pair of numbers is enough to refute a general conclusion. A function that increases on all of , such as , on the other hand carries every inequality over without any condition: implies .
An example of the open case is . This parabola opens downwards, increases to the left of and decreases to the right of it. For , both to the left of , we get : the order stays. For , both to the right, we get : it reverses. For , on different sides, the result is , but for it is . So knowing only that , you can say nothing about and ; knowing in addition that both numbers are at most , you can.
Three functions come up again and again in this topic. The square decreases on and increases on ; its turning point is at zero. The root is defined only on and increases there. The reciprocal decreases on and likewise on , but it is not defined at zero and jumps there from negative to positive values. Which conclusion holds for two numbers follows from these regions together with the signs of and .
Your turn4 of 12
Which conclusion is always correct under the condition stated with it?
A quadratic inequality is decided at the zeros
For none of the transformations from the first sections helps, because cannot be isolated. The way forward is the question of where the expression is positive, and the parabola answers it.
- Bring everything to one side, so that stands on the right.
- Find the zeros, with the quadratic formula from the formula sheet or by factorising. Here , and , so , which gives and .
- Read off the opening. The coefficient of is , which is negative, so the parabola opens downwards: between the zeros it lies above the axis, outside them below.
- Decide the endpoints. At the zeros the expression is zero; a non-strict inequality includes them, a strict one does not.
For the result is . The check with gives , true; the one with gives , so does not belong to the set. You could just as well have multiplied by first; then you have , an upward parabola below the axis, and that is again the same region. So do not memorise a rule like “less than means inside”, but the picture: where the expression is positive or negative is told by the opening together with the sign.
If the expression is already given as a product, read the zeros off directly and determine the sign with a sign table (Vorzeichentabelle). It rests on one rule: a product in which no factor is zero is negative if an odd number of its factors are negative, and positive if an even number are. A factor that appears as a square is never negative and does not count. An example is . With the zeros are , and ; one test number from each section is enough:
| Section | Test number | Product | |||
|---|---|---|---|---|---|
The product is negative between and , except at the point : there the squared factor makes it zero, and the strict inequality excludes that point. The solution set is therefore , an interval with a single point missing. With all three zeros would belong, leaving the whole interval .
If the expression has no zero because a negative number stands under the root of the quadratic formula, it has the same sign everywhere. For the number under the root is , and the expression is positive for every : holds on all of , nowhere.
Your turn5 of 12
Which set is the solution set of ?
An absolute value measures a distance
is the distance of the number from the number on the number line.
This lets you read absolute-value inequalities almost without calculation. The numbers closer than to form an interval around ; the numbers at least away form two rays, one to the left and one to the right.
An example with a plus sign: . Since , this is the distance from , not from . At most away from are the numbers from to , and since the distance itself is allowed, the endpoints belong to the set: .
If there is a factor in front of , take it out of the absolute value first; this works for a fraction too. For we have , and after multiplying by the inequality becomes : all numbers less than away from , that is . If you prefer to calculate, solve the chain , get , and from it the same interval.
For the picture no longer applies, because a distance is never negative: has no solution, and holds for every .
Your turn6 of 12
Which set solves ?
Taking the square root of an inequality produces an absolute value
If both sides are squares, as in , it is tempting to take the root on both sides and write , that is . That is too much, as the check with shows: the left side is , the right side , and is false. The root of a square is not the number itself but its absolute value, , so the correct statement is:
To compute it, multiply out both squares: , so , that is . The product is negative between its zeros and and zero at them, so the solution set is . At both sides equal , at both sides equal .
If the other side is a fixed non-negative number, the absolute value becomes a distance: means , that is . Taking the root is allowed because both sides are non-negative and the root increases on ; that is the section on monotonicity. If the number is negative, the sign alone decides, because a square is never negative: holds for every , for none.
Your turn7 of 12
Which set solves ?
A denominator containing x has an unknown sign
For the step “times ” is tempting. It leads to , that is , and with the zeros and to . That is incomplete, as the check with shows: there the fraction is , and is true. The mistake lies in the multiplication itself. Whether the sign stays or reverses depends on the sign of , and that is unknown. So the cases have to be distinguished.
- Case . The denominator is positive, the sign stays: , so . That lies entirely below and remains.
- Case . The denominator is negative, the sign reverses: , so or . Together with every number above remains.
- The point makes the denominator zero; the fraction has no value there.
The solution set is . The quick step lost the whole right-hand ray. The same problem arises with any factor whose sign is open, including a letter that stands for an arbitrary number: you distinguish positive, negative and zero. In the zero case drops out, and what remains is a statement without a variable, which you only check for true or false.
Instead of the cases you can examine the sign. To do so, bring everything to one side and over a common denominator:
A quotient follows the same sign rule as a product, as long as the numerator is not zero: it is negative if an odd number of the factors in numerator and denominator are negative. Here there are three factors, changing sign at , and :
| Section | Fraction | |||
|---|---|---|---|---|
The zeros of the numerator, and , make the fraction zero and belong to the set because of ; at the original inequality reads , true. The zero of the denominator never belongs to the set, whatever sign is written, which is why gets a round bracket even though neither side equals the other there. Both routes lead to .
Your turn8 of 12
Which set is the solution set of ?
A root carries a condition that becomes part of the solution set
A square root is defined only for non-negative numbers. Before transforming anything in , note where both sides exist at all: on the left is needed, so , on the right , so . Both hold together for ; the domain (Definitionsbereich) is . Numbers below that cannot be solutions, because for them at least one of the values to compare is missing.
On the domain both sides are non-negative, and there the square increases; that is why squaring is allowed: , so . Together with the domain this gives . The left endpoint comes from the root, not from the comparison: at we get , true, and at the left side does not exist. The right endpoint comes from the comparison: at both sides equal .
How much the sign condition matters when squaring is shown by . A root is never negative, so the inequality holds wherever the root exists, and the solution set is . Squaring would give and lose every number between and , because the right-hand side is negative and squaring does not preserve the order there.
Your turn9 of 12
Which set solves ?
A system demands all its conditions at once
The intersection (Durchschnitt) of two sets contains the numbers that belong to and to at the same time. The union contains the numbers that belong to at least one of the two.
A system of inequalities is satisfied by a number if every single inequality is satisfied by it. So solve each inequality on its own and keep only what appears in all the results. Suppose we want all with and . The first inequality gives , the second , and what they share is . The union of the two would be all of , since every number is greater than or at most .
It gets more interesting when one of the sets consists of two pieces. For and the first solution set is , all numbers more than away from , and the second is . The intersection keeps the left piece whole and cuts off everything above from the right one: . The check with confirms it ( and ), and the one with shows why is missing (, but is false). If the individual sets have nothing in common, as with and , the system has no solution and its solution set is empty.
Your turn10 of 12
Which set contains exactly the numbers that satisfy and at the same time?
In word problems the work lies in setting up the inequality
Word problems in this topic are mostly linear inequalities in words. The calculation afterwards is easy; the hard part is translating the words into signs correctly.
| Wording | Sign |
|---|---|
| at least, not less than, from … on | |
| at most, not more than, up to | |
| more than, over | |
| less than, under |
Lea scored , and points in three tests. For the average of all four tests to be at least points, her score in the fourth test must satisfy:
“At least” includes the boundary: with exactly points the average is , and that is enough. Had it said “more than ”, the answer would be . You always find the boundary itself by setting both sides equal; which side of it is the one you want is told by a single check. Business questions take the same work: if revenue is to cover the costs, that means revenue costs, and only then do you calculate.
Your turn11 of 12
Plan A costs euros a month plus euros per minute, plan B costs euros plus euros per minute. For which call time in minutes is A cheaper than B?
Five claims under time pressure
Each of the five claims is decided on its own. How many are true is open; it can be all five or just one. Scoring uses partial points: a correct tick earns a share of the points, a wrong one deducts a share, and a question never drops below zero. If only one claim is correct, the points come only for exactly that one tick, and any further tick sets the question to zero. So a tick pays off when you can justify it. A procedure that works:
- Find the solution set yourself before reading the claims. Then every claim “The solution set is …” is a mere comparison, and no ready-made suggestion steers you.
- Ask about the sign at every step. Are you multiplying by a negative number? By an expression whose sign you do not know? Then flip the sign or split into cases.
- Check the endpoints one by one. Zeros of a numerator or of a quadratic expression belong to the set with and , zeros of a denominator never, and under a root the domain sets a limit.
- Substitute single numbers, into the original inequality, not into a transformed one that may already contain a mistake.
- Check the shape of the set. One interval or several pieces? Count the pieces on your sign table or sketch.
A complete example. Consider the inequality with . First the solution set: bringing everything to the left and factorising gives . The factor is never negative and zero only at ; so the sign is set by , which is positive for and and negative in between. The product is zero at , and , and because of these three points belong to the set. The solution set is .
- The number satisfies the inequality. True. There we get .
- The solution set is . False. This set comes from dividing both sides by : the factor is never negative, but it is zero at , and you must not divide by zero. The gets lost on the way.
- satisfies the inequality too. True. Both sides equal , and allows equality.
- The number satisfies the inequality. False. There we get .
- The solution set consists of two separate pieces. False. There are three: two rays and the single point .
Two of the five decisions hinge on the point , which a hasty division loses, two on a single test number. That is typical: once you have determined the solution set cleanly, the rest needs only substitution and a look at the number line.
Your turn12 of 12
Consider the inequality with . Which claim is correct?
Common mistakes
- Not flipping the sign when multiplying or dividing by a negative number. becomes , not .
- Multiplying by an expression of unknown sign. If a denominator or a factor contains or a letter, you must split into cases or examine the sign.
- Forgetting the zero case for a letter used as a factor. Then a statement without a variable remains, and whether it is true decides the whole solution set.
- Dropping the absolute value when taking roots. becomes , not .
- Using “between” and “outside” by rote. Whether the solution lies between the zeros depends on the opening of the parabola and on the inequality sign, on both together.
- Overlooking the zero of the denominator or the domain. A denominator must not be zero, a number under a root must not be negative, and both hold regardless of the inequality sign.
Key takeaways
- Solution set. Usually one interval or two. A square bracket means “bound included”, a round one “bound excluded”, and next to there is always a round one.
- Transforming. Shifting and stretching by a positive factor keep the sign, a negative factor mirrors and reverses it; an expression of unknown sign is not multiplied by but split into cases.
- Function on both sides. Squaring, taking roots and taking reciprocals keep or reverse the order only where the function is monotonic; the signs of the sides decide.
- Quadratic and product. Find the zeros, read the sign section by section, decide the endpoints by strict or non-strict. Taking the root of a square produces an absolute value.
- Absolute value. is a distance; for , less than gives an interval around and greater than two rays.
- Fraction and root. Count the signs of the factors in numerator and denominator, always exclude the zero of the denominator, always carry the condition under every root along.
- System. Every condition at once.
Was this article helpful?