Checking Claims about Numbers

20 min · 6 drills

The tasks in this topic place five claims about real numbers or functions under a short assumption, and you decide which of them are correct. Correct means correct for every choice the assumption allows; a single admissible choice at which the claim fails refutes it. How to read implication, converse and quantifiers is explained in the article Statements and Implications.

This article supplies the material on which the claims stand or fall: the order on the real numbers, squares, roots and absolute values, and what an assumption about a function gives you. The formula sheet (Formelsammlung) contains none of these rules; you have to bring them along.

The order on the real numbers supplies the rules the claims are tested against

Almost every claim in this topic is a comparison, and four properties of the order stand behind the answers.

  • Trichotomy. For two real numbers exactly one of the three relations x<y, x=y and x>y holds. That is why the negation of x<y is precisely x≥y, why y<x never follows from x<y, and why "x>0 or x<0" fails to hold for every real number: zero satisfies neither part.
  • Transitivity. If x<y holds and y<z holds as well, then x<z holds too.
  • Antisymmetry. If x≤y and y≤x hold at the same time, only equality is left for the two numbers.
  • Splitting <. The statement x<y means the same as "x≤y and x≠y", and equally the same as y−x>0. In the other direction x<y does not follow from x≤y alone, since ≤ expressly permits equality.

The second half concerns the arithmetic: what does an operation do to a comparison?

To both sides of x<yResultCondition
add the same number zx+z<y+znone
multiply by zxz<yzz>0
multiply by zxz>yzz<0
take reciprocals1x>1y0<x<y or x<y<0
squarex2<y20≤x<y
x<y and z<0  ⇒  x⋅z>y⋅z
0<x<y  ⇒  1x>1y

The case z=−1 is the most frequent of all: from x<y follows −x>−y. And the reciprocal rule really does need its condition. For x=−1 and y=1 we have x<y, yet 1x=−1 is smaller than 1y=1, because the two numbers lie on opposite sides of zero.

The sign rule follows from the same calculation: a product, and likewise a quotient, is positive precisely when the two numbers involved carry the same sign, and negative precisely when their signs differ. For the quotient there is the extra demand that the denominator not be zero, and an assumption such as y≠0 aims at exactly that.

Two inequalities pointing the same way may be added: from a≤5 and b≤5 follows a+b≤10. You may multiply them when all numbers involved are positive: from 0<a≤5 and 0<b≤5 follows a⋅b≤25. Watch the sign while doing so. Since a and b are allowed to take the value 5, the number 25 is reachable, and the strict version a⋅b<25 would be wrong: a ≤ promises less than a <.

Your turn1 of 6

The real numbers x and y satisfy x<0<y. Which inference is correct?

Squares, roots and absolute values lose the sign

Absolute value (Betrag)

The absolute value ∣x∣ is x itself when x≥0, and −x when x<0. It is never negative, and it coincides with x itself precisely when x is not negative.

Squaring throws the sign away, and the root does not bring it back. The root always returns the non-negative value.

x2=∣x∣

For x=−3 we get x2=3 and not −3. The rule that settles most claims in this topic hangs on that: from x2=y2 only ∣x∣=∣y∣ follows, that is x=y or x=−y, and equally x=y does not follow from ∣x∣=∣y∣. The other direction is harmless: from x=y it always follows that x2=y2, since inserting produces the same expression twice.

Between square and absolute value there is a genuine equivalence: x2<y2 holds precisely when ∣x∣<∣y∣, because squaring increases strictly on the non-negative numbers. About the order of x and y themselves this says nothing: for x=2 and y=−5 we have ∣x∣<∣y∣, while x>y.

How much a power gives away about the sign depends on whether the exponent is even or odd.

ExponentFrom xn=yn followsReason
even, such as x2 or x4∣x∣=∣y∣a number and its opposite share the same power
odd, such as x3 or x5x=ysuch a power increases strictly on all of R

The same distinction answers the question about the number of solutions, which tasks often phrase as "exactly one" or "none".

  • x2=a with a>0 has two solutions, namely a and −a.
  • x2=0 has exactly one solution, x=0: a product is zero only when one factor is zero, and here both factors are x.
  • x2=a with a<0 has no solution in R, since a square is never negative.
  • x3=a has exactly one solution for every a, because the third power takes each value exactly once.

For the sum, ∣x+y∣≤∣x∣+∣y∣ holds. Equality occurs precisely when x⋅y≥0, that is when the two numbers do not point in opposite directions. For x=1 and y=−1 the left side is 0 and the right side is 2.

Your turn2 of 6

Which inference holds for all real numbers x and y?

Your turn3 of 6

For which real numbers k does the equation x2=9−k2 have exactly two real solutions?

What an assumption about a function gives you, and what it does not

Many tasks replace the numbers with functions and give away only two things about them: which values they may take and whether they are monotone. Exactly as much follows as is written there, and the claims live off claiming a little more.

If f:R→(0,∞) is given, every function value is positive, and nothing further. Positivity carries over to sum, product, quotient, reciprocal and square: all five are positive again, and the quotient is additionally always defined, because the denominator never becomes zero. It does not carry over to the difference, since the assumption says neither which of the two numbers is larger nor whether they differ at all. Nor does it say anything about sizes: a product of positive numbers is positive but can be smaller than each factor, for example 12⋅12.

The more frequent fallacy concerns the point: information about f(x1) holds at the point x1 and nowhere else. From f(x1)<g(x1) nothing follows for another point x2. With f(x)=x2+1 and g constantly 5, the value f(0)=1 is smaller than g(0)=5, while at the point 3 the value f(3)=10 is larger.

Injective (injektiv)

A function is injective when different points have different values, that is when x1=x2 always follows from f(x1)=f(x2). Without such information you may not assume it: a constant function takes the same value at every point.

Strictly increasing (streng monoton wachsend)

f is strictly increasing when f(x1)<f(x2) always follows from x1<x2. Such a function is automatically injective, and the inference also runs backwards: from f(x1)<f(x2) follows x1<x2.

Both additions follow from the same reasoning, and it shows the contrapositive at work. Were x1≥x2, monotonicity would give f(x1)≥f(x2), contradicting the assumption f(x1)<f(x2); so only x1<x2 remains. Injectivity is the same inference for the equals sign: were the points different, one would be smaller, and then the values would differ as well.

Your turn4 of 6

The functions f,g:R→(0,∞) take positive values only. Which claim holds for every x?

Your turn5 of 6

Again f,g:R→(0,∞) take positive values only. Which claim can be refuted by a counterexample?

Five claims under time pressure

The task format demands five independent decisions. How many of them hold is open: all five may, and just as easily only one, but at least one always holds. Anyone who ends up calling all five wrong has got one of them wrong.

Marking is by partial credit. Full marks for a question go only to someone who ticks every claim that holds and none that does not. If more than one claim is correct, every correct tick earns a share and every wrong tick subtracts a share, and a question does not fall below zero; if only one is correct, the points come only for exactly that one tick, and any further tick sets the question to zero. A tick without a reason can therefore cost points you had already secured, and with only one correct claim all of them; tick what you can justify. A procedure that works:

  1. Read the assumption. Which letters are fixed, which are free, which values are excluded? An excluded value such as y≠0 is usually the hinge of one of the five claims.
  2. Classify the claim. If-then, if and only if, for all, there is, and, or: every shape has its own refutation, and the shape is visible in the wording.
  3. Look for the counterexample first. It is cheaper than a proof, and if you find none, the search has usually already shown you which argument carries the claim.
  4. Try the standard values. The value 0 exposes the zero product and the reciprocal, 1 and −1 the sign, 2 and −2 the square, a fraction such as 12 the question of whether a number grows or shrinks when squared. For functions the constant functions and x2 do the same service.
  5. Read the five claims against each other. Contrapositives share a truth value, exactly one of two mutual negations is correct, and two claims that differ only in the direction of an inequality sign cannot both be correct.

A full example. Let a and b be two real numbers with a≠0.

  • If a⋅b=a, then b=1. Correct. Since a≠0, dividing by a is allowed, and b=1 is what remains. Without that assumption the claim would be wrong, because for a=0 the equation holds for every b.
  • If b2=4, then b=2. Wrong. The number b=−2 satisfies the assumption and violates the conclusion; from the square only ∣b∣=2 follows.
  • It holds that a2>0. Correct. A square is never negative, and it becomes zero only at a=0, which is excluded.
  • If a<b, then a2<b2. Wrong. For a=−3 and b=1 we have a<b, yet a2=9 is larger than b2=1: squaring reliably keeps the comparison only when neither number is negative.
  • There is a b with a⋅b=1. Correct. The reciprocal b=1a does it, and it exists because a is not zero.

Three of the five decisions hang on the same piece of information, namely on a≠0. That is typical for these tasks: what the assumption excludes is excluded because it would otherwise be the value at which the claim breaks.

Your turn6 of 6

Let a and b be real numbers with a>0. Which claim is correct?

Common mistakes

  • Overlooking the sign and the zero. The reciprocal rule flips a comparison only when both numbers have the same sign, and a=b follows from a⋅t=b⋅t only once t≠0 is secured.
  • Confusing ≤ with <. A reachable bound refutes the strict version, not the loose one, and x<y does not follow from x≤y.
  • Carrying information from one point to another. What is said about f(x1) holds at x1; about f(x2) nothing has been said.

What to take away

  • Comparisons. Adding keeps an inequality sign, multiplying by a negative number flips it, and taking reciprocals flips it only when both numbers have the same sign.
  • Square, root, absolute value. x2=∣x∣ holds; from x2=y2 only ∣x∣=∣y∣ follows, whereas x3=y3 gives x=y.
  • Functions. Positive values carry over to sum, product, quotient and reciprocal, but not to the difference, and information about f(x1) holds only at the point x1.

Now practise it

Checking Claims about Numbers (Behauptungen über Zahlen prüfen)

Trainer · Mathematics

Practise
Next: Elementary Algebra (Elementare Algebra)
0/6

Was this article helpful?