Elementary Algebra (Elementare Algebra)
The tasks in this topic show an expression (Term) or an equation, with five claims underneath, and ask which of them hold. The tick column is headed "Richtig" (correct). Almost all the claims come down to the same question: is the rewritten expression still the same as the original one, and for which numbers is that true? With equations a second question joins it: how many solutions are there really, and which of them did a rewriting only pretend to produce?
The formula sheet (Formelsammlung) helps in this topic at exactly two points. Of its twelve formulas only the quadratic formula (Lösungsformel) belongs here: you need it when squaring a root equation, or a substitution, leaves a quadratic equation behind. It also shows the four ways of writing bounded intervals, , , and : a round bracket excludes the endpoint, a square one includes it. Intervals with are not on it. That denotes all positive numbers, and that always takes a round bracket, is something you have to know yourself. Everything else is missing as well: no power rule, no binomial formula, no rule for fractions, roots or absolute values, nothing on percentages. What this article says about them is something you have to bring with you.
Rewriting means the value stays and the shape changes
An expression is a piece of arithmetic built from numbers, variables and operation signs, with no equals sign. is an expression; is an equation.
Two expressions are equivalent if they yield the same value for every admissible assignment of the variables. A rewriting is equivalent if it turns an expression into one equivalent to it.
The word "admissible" carries more weight in this topic than anything else. An expression may have no value at all for some numbers, for instance because a denominator would be zero, and then nothing is being claimed about those numbers. Claims of the form "for every , " therefore have to be checked in two parts: is the computation right, and is it right everywhere the original expression has a value at all?
The check itself is cheap: substitute a number. If someone claims is the same as , then settles it, since the left side is and the right side . A single value at which the two sides come apart disposes of a claim about all values. The converse fails: a value that fits proves nothing. At the two expressions agree, and the claim is false all the same.
Your turn1 of 12
Someone claims: for every real , . Which reasoning decides the claim correctly?
A shared base adds the exponents, a power of a power multiplies them
For and any rational exponents , the table below holds. With integer exponents, is enough; in the last row is a natural number from upwards.
| Rule | Formula |
|---|---|
| Product with a shared base | |
| Quotient with a shared base | |
| Power of a power | |
| Product in the base | |
| Quotient in the base | |
| Negative exponent | |
| Exponent zero | |
| Fraction as exponent |
Two of these are mixed up regularly. First, an exponent on a bracket applies to everything inside it, numerical factors and signs included: is never negative, whereas is never positive, because there only the is squared. Second, there is no power rule for sums: is not , and that case belongs to the binomial formulas.
An example with a negative and a fractional exponent. Let and
The minus in the exponent turns the fraction upside down: . The exponent is the square root and applies to each factor separately, the included: , , . So . Check with and : inside the bracket we have , and ; the result gives . Anyone who leaves the untouched gets , which gives in the check; anyone who overlooks the minus gets the reciprocal , which gives . A test value like is well chosen here, because it makes the powers of disappear and leaves only the numbers.
With two variables each base is handled on its own, and a negative exponent in the denominator turns into a plus when subtracted: .
A number is in scientific notation when it has the form , where is an integer and . You compute factor by factor: the leading numbers are multiplied or divided, and the exponents of ten are added or subtracted by the power rules.
This expression needs all the rules at once:
The square applies to both factors, and . When dividing, the exponent of the denominator is subtracted, and subtracting means adding . At the end there is in front of the power of ten, and that is not scientific notation: a factor of moves into the exponent. Anyone who does not double the exponent when squaring, or does not square the , is off by many powers of ten or by a factor of , and a rough look at the order of magnitude shows it.
Two more moves. When adding there is no exponent rule: first the powers of ten are made equal, . And when converting to a decimal, the negative exponent counts the place after the decimal point where the first digit stands: in the is in the fourth place. Finally, the square root halves the exponent of ten, , because ; if the exponent is odd, you make it even first, for instance .
Your turn2 of 12
Let . Which expression equals ?
Expanding means every summand times every summand
When you expand (ausmultiplizieren) a product of brackets, every summand of the first bracket is multiplied by every summand of the second. If the first bracket has two summands and the second three, six products arise:
That four of the six products cancel each other here is a property of these particular brackets, not a rule. Two checks secure the result: tests the constant term, on the left , on the right ; tests the rest, on the left , on the right .
The three binomial formulas (binomische Formeln) are special cases of the same procedure that are worth knowing by heart:
Your turn3 of 12
The product is expanded. What is the coefficient of in the result?
The binomial formulas pay off mainly in reverse
Whoever sees recognises the product in it, and a product can be cancelled while a difference cannot. That saves arithmetic with numbers too: , without computing a single square. Sometimes the formula applies twice: . The sum , on the other hand, cannot be split any further.
You recognise a perfect square by its middle term. The control question runs: does the middle hold twice the product of the roots of the two outer terms? In the outer terms are and , their roots and , twice the product . It fits, and with the minus in the middle the expression is . Had the middle been , it would not be a square.
When expanding, the highest powers can cancel, and then the degree is lower than the brackets suggest. An example with cubes:
On the left there are two cubes; what remains is an expression of degree . The cube of a sum comes from expanding twice, , and here too there is no power rule for sums: is not . Anyone who assumes it gets the number as the difference; the check with exposes this, since .
Your turn4 of 12
Which expression equals for every real ?
For a fractional expression the domain comes before any rewriting
The domain of an expression is the set of all numbers for which it has a value. Excluded are numbers that make a denominator zero or leave something negative under a square root.
The domain is read off the original expression, not off the cancelled one. Cancelling can make a gap invisible without removing it. Take
The denominator is and becomes zero at and at ; these two numbers are excluded. The numerator is factored by grouping: . For every other the common factor may be cancelled: . Two consequences are easy to miss. First: the numerator is zero at and as well, and that rescues nothing, because is not a value. Every number that makes the denominator zero is excluded, whatever the numerator does there. Second: the cancelled expression would have the value at and the value at . does not take these two values, because reaches them only at the excluded points. The value , on the other hand, does take at : there only the numerator is zero, the denominator is , and is an ordinary value. Check with : .
Only factors may be cancelled, that is, parts joined to the rest by multiplication, and only where they are not zero. Summands may not be cancelled.
This is where the most common mistake of the whole topic happens, and with plain numbers you see at once why it is one. Striking the two threes in would give , but the true value is . With variables it is no different: a variable that stands above and below as a summand may not be struck out. So you factor before any cancellation, and where nothing factors, nothing is cancelled.
When two fractions are combined, the common denominator (Hauptnenner) is the least common multiple of the denominators, and to find it the denominators are factored first. In
we have , and this denominator already contains the first one. So the common denominator is , not the product . The first fraction is multiplied top and bottom by :
The minus in front of the second fraction applies to its whole numerator, hence and not . Excluded are and . Check with : on the left , on the right .
A compound fraction has fractions of its own in the numerator or the denominator. You simplify it by multiplying top and bottom by the common denominator of the small fractions. That leaves the value unchanged, because numerator and denominator are multiplied by the same non-zero number.
An example with one variable in which whole numbers and fractions are mixed:
You multiply by , and every summand above and below, including the and the that are not fractions: , , . Multiplying only the small fractions changes the value. Three numbers are excluded. , because the small fractions have no value there. and , because there the original big denominator is already zero; that the factor cancels later changes nothing. Check with : the top is , the bottom , the value is , and agrees.
Your turn5 of 12
For which real does hold?
A root rule applies only once every root has a value
For we have , and for , we have . Nothing of the sort holds for sums: is not , as already shows, since the left side is and the right a little over .
The condition decides the domain, and for the quotient is added. In the expression each of the two roots must have a value and the denominator must not be zero: and , and both hold at once exactly on . There you may combine, , and at both sides give . But the combined expression also has a value at , namely , because there two negative numbers give a positive quotient, while in the original expression does not exist. So the two expressions agree only on . The domain is read off the separate roots, as the intersection of all the separate conditions.
Roots with the same radicand are combined like terms of the same kind, just as . To make this possible with different radicands, you take out the largest square factor, and you take it out as its root: , not (teilweises Radizieren). A root expression often becomes rational only through multiplying or dividing: and , although each of the roots involved is irrational.
Is larger than ? Both numbers are positive, so it is enough to compare their squares. We have and , so yes, narrowly. Squaring squares the leading factor too: anyone who computes reaches the wrong conclusion.
When a difference of roots sits in a denominator, the third binomial formula helps. You multiply top and bottom by the expression that differs only in the sign between the summands, and so make the denominator rational (Nenner rational machen):
What remains in the denominator is , with no root left; that is the whole job.
The absolute value equals for and for . It is never negative and gives the distance of the number from on the number line; is accordingly the distance from to .
This equation is not a quibble. holds only for ; at the left side is and the right side . In the same way, does not give but , that is, or . Squaring forgets the sign, and the root does not give it back. For every expression : exactly when , and exactly when .
Your turn6 of 12
What is the value of ?
An absolute value equal to a positive number gives two cases, equal to a negative one none
with means or . For the single case remains, and for there is no solution, because an absolute value is never negative. Anyone who solves only the case when loses the solutions of the second.
Read as a distance, this becomes a picture. is the distance from to , and with asks for the numbers at distance from : one to its left, one to its right. The same picture solves equations with two absolute values at a glance: requires to be equally far from and from , and only the midpoint is. Check: and .
If the right side is not a fixed number but an expression in , the same case split applies, but the right side has to be non-negative at every solution. For the cases and give the candidates and . For both, the right side is negative, and , and an absolute value never is. So the equation has no solution, even though the computation produced two numbers. A condition set in advance is quicker: requires , and neither candidate satisfies it.
If the absolute value sits inside a quadratic equation, a substitution helps. Because , the equation can be written with as , that is . The value drops out, because an absolute value is never negative; gives , so or . The equation thus has two solutions: of the two values of , only one yields any. The count runs like this: every positive yields two values of , yields only , a negative none. That solves the equation whenever does is because occurs only as and .
Your turn7 of 12
What is the solution set of the equation ?
An absolute value next to other terms splits the number line, and every solution must fit its interval
If an absolute value cannot be isolated on one side, the procedure hinges on the point where the expression inside changes sign. The number line falls apart there into intervals. In each interval the expression has a fixed sign, the absolute value becomes an ordinary bracket, and an equation without absolute values results. Every number found this way must then be checked against the interval it was computed for. If it lies outside, it is an extraneous solution (Scheinlösung) and is struck out. For the same reason the number of cases is not the number of solutions.
An example: . The expression changes sign at .
- For we have , and the equation becomes , that is . The candidates are and ; only lies in the interval.
- For we have , and the equation becomes , that is . Under the root of the quadratic formula stands : no candidate.
So the equation has exactly the solution ; check: . Substituting the struck-out candidate shows why it does not belong: . It solves the equation of the first interval, but that equation does not hold at at all.
With several absolute values only the number of intervals grows. Each absolute value brings a point where its expression changes sign, and such points split the number line into intervals, in each of which all the absolute values are resolved. A nested absolute value with a further term in beside it is resolved from the inside out: the sign changes of the inner expression split the number line, in each interval the inner absolute value becomes a bracket, and the outer one is then an equation with its two cases. The check against the interval is the same in every case.
If only a number stands beside the inner absolute value, you can also work from the outside in. means or , that is or . Each of these equations has two solutions, and together they are , , and .
Your turn8 of 12
What is the solution set of the equation ?
Squaring is not an equivalent rewriting, hence the check
From it follows that , but not the other way round: and have the same square. The equation holds exactly when or ; each of its solutions solves one of these two equations, but not necessarily the first. A root equation is squared anyway, because there is rarely another route, and the price is a check (Probe) in the original equation.
Solve . The root already stands alone. Squaring gives ; the squares cancel, and what remains is the linear equation , so . Now the check in the original equation: on the left , on the right . That does not fit, because a square root is never negative. The number solves , the second of the two equations that squaring merged.
So the equation has no solution, even though the computation produced a number. Often quicker than the check is a condition set in advance: since the left side is never negative, the right side must satisfy , so only comes into question, and drops out at once. If a quadratic equation remains after squaring, the quadratic formula on the formula sheet yields up to two candidates, and each one is checked separately.
Your turn9 of 12
What is the solution set of the equation ?
A percentage is a factor, and factors do not add
An increase by percent is multiplication by , a decrease by percent multiplication by . An increase by percent is thus the factor , a decrease by percent the factor . Everything else follows from this one observation.
Several changes in a row are the product of their factors. An increase of percent followed by one of percent gives , that is percent and not : the second increase is taken on the already increased value. A decrease of percent followed by one of percent gives , a decrease of percent and not . If a value rises first by and then by percent, the result is the same as in the reverse order, since : multiplication commutes.
Working backwards means dividing by the factor. If a coat costs euros after a percent discount, the original price was euros. The obvious computation euros is wrong, because the percent refer to the old price and not to the euros. The check shows it: percent of is , and .
Percentage points (Prozentpunkte) are not the same as percent. If an interest rate rises from percent to percent, it has risen by one percentage point, but by percent, since . The first figure is a difference of two rates, the second a comparison with the old rate as the base value (Grundwert).
Your turn10 of 12
A retailer sells an item for euros. The price includes a markup of percent on the purchase price. What was the purchase price?
From sentence to expression: name the unknown first, then translate
When the setup is given in words, first name what the letter stands for, then translate sentence by sentence. The order of the words is not always the order of the computation: " less than " is , not . A bracket is needed exactly when an operation is applied to a result that is itself already a sum or a difference. If a kilogram of apples costs euros and a kilogram of pears euro more, then kilograms of pears cost euros: what is tripled is the whole price per kilogram, not just . For that is euros, while would give only .
In a chain of quantities each one is formed from the previous one, not from the first. Anna has euros, Ben a third less than Anna, and Clara twice as much as Ben. Then Ben has euros, not : the third refers to the amount Anna has, not to the number . Clara has euros, a third more than Anna, although the text only says "less" and "twice". If you know that Clara has euros more than Ben, the difference becomes an equation: gives , so , and euros.
Claims in such tasks often name a ready-made expression or a number. Adopt none of them: set up your own expression and substitute the stated number into it.
Your turn11 of 12
Max has a quarter less money than Lea. Nora has euros more than twice what Max has, namely euros. How much money does Lea have?
Five claims under time pressure
The task format calls for five independent decisions. How many of the claims hold is open, but at least one always does. Marking uses partial credit. If more than one claim is correct, every correct tick earns a share of the points and every wrong tick subtracts a share, and a question never falls below zero; if only one is correct, the points come only for exactly that one tick, and any further tick sets the question to zero. A tick without a reason can therefore cost points you had already secured; tick what you can justify. In this topic a fixed order of work pays off:
- The domain first. Which numbers does the original expression rule out? If a fraction, a root or an absolute value is involved, settle that before you rewrite anything.
- Substitute rather than rewrite. A claim about a single value takes ten seconds. A claim of the form "for every " is refuted by a single inconvenient value.
- Know good test values. The value exposes constant terms, makes powers disappear, and expose sign errors, and a fraction like shows whether a number grows or shrinks when squared. Avoid values that happen to make both sides agree, and when in doubt check with a second value of a different kind.
- With equations, really find the solutions. How many are there, are they integers, what are their sum and product? All these questions are answered most safely by computing the solutions, striking out the extraneous ones and substituting the rest.
- Read the five claims against each other. Two rewritings of the same expression that differ by a factor cannot both be right. If one claim names the solutions and another their sum, the two have to agree.
A complete example with a variable in the exponent. For real let
First factor: by the rule for a shared base, , and can be taken out of the numerator, . Now is a factor, and . The denominator is never zero, because for every real . Five claims of the kind that could be made about this expression:
- For every real , . Correct, as the factorisation shows.
- is defined for every real . Correct. A power of is positive, so the denominator is never zero.
- . False. Exponents are subtracted only when dividing powers of a shared base, not when subtracting the powers. For the left side is .
- . False. This expression arises from striking in the numerator against the denominator, and what was struck out is a summand, not a factor. At this expression happens to give , but at it gives .
- . Correct; that is the rule for a product with a shared base, read backwards.
The check at would not have exposed the false cancellation, since there both expressions happen to agree. That is what the third step is for: a single test value can deceive, a second one of a different character rarely does.
Your turn12 of 12
For real let . The test value confirms two of the following claims. Which one holds for every real ?
Common mistakes
- Applying a negative exponent to only part of the bracket. is , not . The exponent applies to the whole bracket, numerical factors included.
- Cancelling summands. In there is nothing to cancel, and the result is not . Factor first, then cancel, and if nothing factors, the fraction stays as it is.
- Reading the domain off the cancelled expression. The gap belongs to the original expression, and a value the cancelled expression takes only at the gap is not taken.
- Confusing the zeros of numerator and denominator. What makes the denominator zero is excluded, even if the numerator is zero there as well. A zero of the numerator alone is an ordinary value .
- Reading the domain after combining roots. requires and separately; requires less.
- Taking roots of sums. is not . Only roots with the same radicand are combined, and when taking out a square factor it is the root of that factor that goes in front, not the factor itself.
- Distributing a reciprocal over summands. is not : , but is negative. A difference of roots in a denominator is removed by multiplying top and bottom.
- Treating only one case in an absolute-value equation. with has two cases, and when the right side contains or there are several intervals, every number is checked.
- Skipping the check after squaring. Squaring creates extraneous solutions. The check is always done in the original equation.
- Adding percentages or computing from the wrong base value. Two changes give the product of their factors, and you work backwards by dividing, not with the reversed percentage.
- Taking for . It is , and gives only .
Takeaways
- The domain first. It is read off the original expression, and no rewriting may quietly enlarge it.
- Only factors are cancelled. That is why factorising is the real work, and taking out a common factor and the binomial formulas are its most frequent tools.
- The exponent on a bracket applies to everything in the bracket, and for sums there is neither a power rule nor a root rule.
- Square and root lose the sign. , and squaring an equation demands the check.
- Absolute-value equations by cases. Two cases for , none for , and every solution must fit its interval and have a non-negative right side.
- A percentage is multiplication. Two changes in a row give the product of their factors, and you go back by dividing.
Was this article helpful?