Area under a curve in m², ha and dm²

16 min · 3 drills

In the textbook: Ch. 4.3 Anwendungen von Integralen4.1 Stammfunktionen und Integrale

You can already read the integral as the area under a graph. In exam tasks that area almost always costs something: tiles, paint, land. This article shows how to get from the area on the graph to an amount of money without slipping on the way.

Imagine a homeowner who wants to pave the yard. The yard is irregular: on one side a curved path bounds it, and on the plan that edge is drawn as a curve. The builder names a price, 25 € per square metre, and before agreeing the owner gets out the plan of the plot.

On the plan the yard is bounded:

  • above by the graph f(x)=1+x23, below by the x-axis;
  • left and right by the lines x=1 and x=4;
  • one length unit on the plan is 10 m, and the paving costs 25 € per m².

What will it cost to pave the whole yard?

For a rectangle, length and width would do. Here the edge is curved, and the integral gives the area. But the integral counts in squares of the plan, while the price is per square metre, so you cannot multiply the two straight away: first the units have to be converted. More mistakes happen at this step than in the integral itself: one unit of length on the plan is 10 m here, so one square is already 100 m². Tasks about a field in hectares and a part painted per dm² work the same way. In the exam the figure is given by a graph and straight lines, and the question asks for money.

The yard will cost 25000 €. The integral gives the area in squares of the plan: ∫14(1+x23)dx=10. One square of the plan is 10 m by 10 m, that is 100 m², so the yard covers 10⋅100=1000 m², and the paving costs 1000⋅25=25000 €. Multiply the 10 squares by 10 m instead of 100 m² and you get 2500 €, a tenth of the real price. This conversion of squares into square metres, hectares or dm² is the key step of the article.

The basics: the integral as an area

The ten squares of the yard came from the integral. The area under a curve is worked out with the integral from the article “What the integral measures: area and average value”:

  • an antiderivative F is a function whose derivative is f: F′=f; the integral is F(b)−F(a), where a and b are the limits;
  • if the curve lies above the axis on the whole of [a,b], the area of the figure is the integral itself;
  • a piece below the axis gives an integral with a minus, and you take it without the minus.

The value at the lower limit is always subtracted: for an exponential, F(0) is not zero.

The area under a curve and its price

The yard was paved by the square metre, and one unit of length on the plan was 10 m. In the exam task a field is rented out by the hectare, and one unit of length is now 100 m:

Exam-style task

Ein Feld liegt zwischen einer geraden Straße (der x-Achse), einem Zaun entlang des Graphen von f(x)=6+2x und den Geraden x=0 und x=5; eine Längeneinheit entspricht 100 m. Die Pacht beträgt 8800 GE pro Hektar (1 ha=10000 m2). Wie hoch ist die Pacht für das ganze Feld (in GE)?

  1. a)588544.00
  2. b)484000.00
  3. c)645656.00
  4. d)4840.00
  5. e)626780.00

The price in the task is given in GE: these are money units, ordinary money with no fixed currency.

How to spot it: a figure lies between a graph, the x-axis and two vertical lines, and the question asks for money. The price is given per unit of area (“per hectare”), and the lengths in their own units (“one length unit is” 100 m).

If the curve is above the axis on [a,b], the area of the figure is the integral (section “Area and sign”). The integral gives the area in units of the graph:

  • a square with a side of one graph unit is one unit of area;
  • if the length unit is 100 m, such a square measures 100 m × 100 m = 10000 m², exactly one hectare;
  • only after converting do you multiply the area by the price, by the number of pieces and, if both sides are painted, by 2.
Field under the line f(x) = 6 + 2x: the figure lies above the axis, so its area is the integral, and the unit of area is then converted to hectares05616x, per 100 mf(x), per 100 mf(x) = 6 + 2xf(0) = 6, f(5) = 16: above the axis
Step 1 of 4Check that the figure is above the axis

The limits come from “the lines x=0 and x=5”. At the ends f(0)=6 and f(5)=16, in between a straight line, so the whole figure is above the axis. The area is ∫05(6+2x) dx.

A sheet-metal part is bounded by the curve f(x)=−x2+6x (in cm) and the x-axis. It is painted on both sides, and the paint costs 0.80 € per dm².

What does the paint for 50 parts cost?

The integral gives the area in cm², but the paint is priced per dm²: you cannot multiply the two straight away.

Sheet-metal part under the parabola f(x) = −x² + 6x: the figure runs from zero to zero above the axis, lengths in centimetres0369x, cmf(x), cmone sidef(x) = −x² + 6xboth sides painted: twice the area

The highlighted region is one side of the part. Both sides are painted, so twice that area counts, and only then are square centimetres converted to square decimetres.

  1. Limits from the zeros: −x2+6x=x⋅(6−x)=0 at x=0 and x=6. At x=3 the value is 9>0, the curve is above the axis between the zeros.
  2. Antiderivative: −x2 gives −x33, 6x gives 3x2.
  3. At x=6: −2163+3⋅36=−72+108=36. At x=0 zero. The area of one side is 36 cm².
  4. Two sides: 2⋅36=72 cm².
  5. A decimetre is 10 cm, a square decimetre 10⋅10=100 cm². So 72 cm² =72/100=0.72 dm².
  6. One part: 0.72⋅0.80=0.576 €. Fifty parts: 50⋅0.576=28.80 €.

Multiplying 72 cm² by the price per dm² gives 57.60 € for one part. Counting one side gives 14.40 € for all of them.

A sheet-metal sign is bounded by the curve f(x)=−x2+8x (in cm) and the x-axis. It is painted on one side, and the paint costs 1.50 € per dm².

What does the paint for 40 signs cost?

The price is per dm², while the integral works in cm²: the units have to be matched first.

  1. Zeros: x⋅(8−x)=0 at x=0 and x=8. At x=4 the value is 16>0, the curve is above the axis between the zeros.
  2. Antiderivative −x33+4x2. At x=8: −170.67+256=85.33, at x=0 zero. The area is 85.33 cm².
  3. Convert the area to dm² and work out the paint for 40 signs.

Your turn2 of 3

A sticker is bounded by the graph of f(x)=12−x2 (in cm), the x-axis and the lines x=0 and x=3. The film costs 0.40 € per dm2. What does the film for 500 stickers cost?

Your turn3 of 3

A measuring device records the decaying curve f(x)=6⋅e−0.5x. Find the area under this curve between x=1 and x=4. Round to two decimal places.

Area traps

  • Converting units with the wrong factor. In the method's task 55/100=0.55 gives 4840 GE, option d. The temptation: the statement contains 100, and cm² are converted to dm² by dividing by 100. To catch it: square the length factor. 100 m gives 100⋅100=10000 m², exactly 1 ha, so there is nothing to divide. 10 cm give 100 cm² in 1 dm², so you divide by 100, not by 10.
  • Multiplying cm² by the price per dm². For the part this gives 57.60 € apiece instead of 0.576. To catch it: before multiplying by the price, the area must be in the same unit as the price.
  • Taking a rectangle instead of the area under the curve. For the field f(5)⋅5=80 units instead of 55, for the sticker f(0)⋅3. The temptation: “height × width” is right for a strip of constant height. To catch it: a changing function needs the integral.
  • Forgetting the lower limit. For the decaying curve F(4)−F(0)=10.38 instead of F(4)−F(1). The temptation: in the formula on the sheet the interval starts at zero, and F(0) seems to be zero. To catch it: F(a) is always subtracted, and for an exponential F(0)≠0.
  • Getting the antiderivative of a power or an exponential wrong. Raising the exponent and not dividing by the new one (x2 gives not x3 but x33), or multiplying by k instead of dividing for ekx. To catch it: differentiate the F you found, it must give f.

On the sheet: ∫xα dx=xα+1α+1 and ∫ex dx=ex. Unit conversions are not on the sheet: 1 dm2=100 cm2 and 1 ha=10000 m2 you remember yourself.

Formula sheet and what to memorise

The formula sheet gives the antiderivatives for the yard and for the field. How to turn squares of the graph into square metres or hectares is not written there.

Remember yourself:

  • for ekt the antiderivative is 1k⋅ekt, and F(0)=1k, not 0;
  • 1 dm2=100 cm2; a length unit of 100 m gives a unit of area of 1 ha.

In short

  • Area and its price

    A figure between a curve, the x-axis and two lines, with a price per dm² or hectare. The area A comes from the integral, then the unit conversion and the price.
    A=∫abf(x) dx,1 dm2=100 cm2

    Trap: multiplying cm² by the price per dm² or converting with the wrong factor; square the length factor.

The price of a figure in hectares and square metres is among the tasks of the trainer “Applications of integrals”. So far the x-axis bounded the figure from below; in the article “Two curves: the area between them and market surplus” a second graph takes its place.

Now practise it

Area under a curve in m², ha and dm²

Trainer · Integral calculus

Practise
Next: Two curves: the area between them and market surplus
0/3

Was this article helpful?